WORLDWIDE
首頁 / 公司簡介
公司簡介
隆特潤科技有限公司
隆特潤科技有限公司是一家以『潤滑科技』為經營主軸的研發型企業,為一專業特殊潤滑劑製造廠,由美國、德國、日本、英國、法國、荷蘭、義大利等先進國家進口一百多種不同功能之合成潤滑油及添加劑,並與Lubrizol, BASF, Du Pont, Uniquema, Dow Chemical, Rheox, Akzo Nobel, Rohms, Elco, Ciba, R.T. Vanderbilt, Ethyl, Additiv Chemie, Hornett Brothers, Oleon, Oxy-wax, Evonik, Alox, King..etc.等國際著名添加劑公司進行密切合作與技術交流,建立起強大之技術研發能力,專門為客戶量身訂做、研製開發各類型企業(如機械業、金屬加工業、汽車零件製造加工業、航太材料加工業、鋁合金、鎂合金、銅製品加工業、電子業、紡織業、玩具、照相機製造業、運動器材業、自行車製造業、儀器、鐘錶製造業、國防軍事工業等)在產品使用、生產製程或高端設備在使用上所面臨的潤滑難題,而在常規性潤滑產品無法滿足企業需求時,與客戶合作開發測試,共同找出合宜適用的解決方法與產品,並長期穩定地提供客戶品質優良好用的產品,使客戶的生產作業能長期穩定的進行而無後顧之憂。
本公司目前已有下列15大產品項目,內含數百種品項,詳情請參看產品介紹:
1. 合成潤滑脂 Synthetic greases
2. 工業及車用潤滑脂 Grease for industrial and automotive applications
3. 特殊用途潤滑脂 Grease and paste for specialized applications
4. 高溫多效潤滑脂 General purpose Hi-temp greases
5. 金屬切削及研磨油 Metal working fluids for cutting and grinding
6. 沖壓伸抽成型加工用油 Metal forming, forging, drawing working fluids
7. 防銹油及水性防銹劑 Rust preventives and corrosion inhibitors
8. 特殊用途潤滑油,離型劑 Lubricating oil and mold releasing fluid for special applications
9. 電機電子工業特殊潤滑劑 Lubricants for electrical applications
10. 自行車及汽機車用潤滑油 Lubricants for bicycle, motorcycle and automobile applications
11. 車輛用附屬品 Automotive auxiliaries
12. 燃油添加劑 Fuel additives
13. 軍用設備潤滑油 Specialties for military applications
14. 工業用清洗、脫脂劑 Industrial cleaners
15. 一般工業用潤滑油 Lubricating oil for general industrial applications
本公司目前已有下列15大產品項目,內含數百種品項,詳情請參看產品介紹:
1. 合成潤滑脂 Synthetic greases
2. 工業及車用潤滑脂 Grease for industrial and automotive applications
3. 特殊用途潤滑脂 Grease and paste for specialized applications
4. 高溫多效潤滑脂 General purpose Hi-temp greases
5. 金屬切削及研磨油 Metal working fluids for cutting and grinding
6. 沖壓伸抽成型加工用油 Metal forming, forging, drawing working fluids
7. 防銹油及水性防銹劑 Rust preventives and corrosion inhibitors
8. 特殊用途潤滑油,離型劑 Lubricating oil and mold releasing fluid for special applications
9. 電機電子工業特殊潤滑劑 Lubricants for electrical applications
10. 自行車及汽機車用潤滑油 Lubricants for bicycle, motorcycle and automobile applications
11. 車輛用附屬品 Automotive auxiliaries
12. 燃油添加劑 Fuel additives
13. 軍用設備潤滑油 Specialties for military applications
14. 工業用清洗、脫脂劑 Industrial cleaners
15. 一般工業用潤滑油 Lubricating oil for general industrial applications
添點潤滑油 和氣生財
Cable Pulling Lubricant 拉線膏
- PC-WAX
- Blue-Jel
- 導電銅膏
- Hinge Grease
- Super Deep Drawing Oil
深油拉管油 -
Corrosion Inhibitor
水性防銹劑
Vacuum Pump Oil
真空幫浦油
- Sticky Hi-Temp Crease
高黏性潤滑脂 - Anti-Seize
防卡劑
Grease For Special Applications
特殊用途潤滑脂
- Thermal Conductive
TC250 - M0S2 Grease fot Anti-Seize
MS-50 - PolyureaE.P.Grease
U2
- Fluoro Grease
FF-3 - Sticky PTFE Grease
GF100 - Super Synthet PTFE Grease
LSF-3 - Silicon Synthetic Grease
SI-3 - Hi-Temp Ultra Sticky Grease
A2 - Damping Grease
VX300
Control Cable Grease
氟矽潤滑脂
氟矽潤滑脂
- FB100
- FS112
- Damping Oil
避震器油 - Graphite Hot Forging Lubricant
石墨熱鍛離型劑 - Super Drawing Compound
壓板油精
We are expert in Specialty Lubricants & Greases, and also in Industrial cleaners and rust preventives for most kinds of applications.
Our products including:
- Metal working fluids for cutting , wire drawing, pipe bending, hot forging, bolt & nut & metal forming.
- Cable Pulling Lubricant.
- PTFE Grease for Clean room & Vacuum Chamber.
- Thermal conductive paste.
- Special Lubricating oil & Grease for Vacuum Pump, Damping, Chain Lubricants, Fine Instruments, Heat transfer, Control Cable, Ultra High Temperature or Arctic Low temperature application.
- Tire Mounting Lubricant.
- Industrial Cleaner & Powder Cleaner for Machine Shop.
- Rust Preventives & Corrosion Inhibitors for copper, steel.
- Fuel Power Up & Engine Oil Treatment.
- Radiator Coolant & Wiper Cleaner.
- Non-Slip adhesive for Palletizing.
- Custom-Made Specialties.
PC-WAX 拉線膏
Cable Pulling Lubricant
超潤滑效能的拉線膏
電線,電纜拉線施工的新利器
潤滑效能超越三大進口品牌同等品
讓您的配線工程作業 更順暢、更省力、更省錢
保證絕對讓您物超所值
潤滑效能超越三大進口品牌同等品
讓您的配線工程作業 更順暢、更省力、更省錢
保證絕對讓您物超所值
為高值化產業解決潤滑技術上的難題
Product Description
PC-WAX Cable Pulling Lubricant is a yellow wax based emulsion which has excellent lubricating properties for smooth low tension wire and cable pulling. Which is suitable for pulling a wide variety of cables types. These include power control, instrumentation and communication cables.
• Wax-based formula provides superior lubricity.
• Creamy texture applies casily and uniformly. - Homogeneous blend requires no mixing
• Clings to cable throughout long pulls
• Easy to apply by hand or with pump.
• Won't dry out -- surface coat forms to control evaporation
• Dries to a thin, non-conductive film that won't clog conduit.
• Stays on cable when pulling through water filled conduits.
• Compatible with a wide range of cable jackets Including Polyethylene Jackets
• Compatible with semi-conducting materials.
• Temperature stable. Does not liquify or get runny at high temperatures.
• Environmentally safe non-toxic, non-flammable and non-corrosive
Installation Techniques
The lubricant needs to reach all points where the cable and conduit rub together, to obtain optimum tension reduction. Normal application is by hand wiping on the cable jackets as the cable is pulled into the conduit. The cable will generally carry enough lubricant to complete an average pull. If cable pulls are long or difficult, inject extra lubricant directly into the conduit ahead of the cable, in addition to wiping on the cable jacket The amount of lubricant needed can vary greatly depending on the difficulty of the pull. A general formula to determine application rates for a normal pullis:
Quantity (gallons) - .0015 xLxD
L-length of pullin feet
D-diameter of conduit in inches (approximately 3/4 gallon per 100 ft. of 5"conduit).
• Wax-based formula provides superior lubricity.
• Creamy texture applies casily and uniformly. - Homogeneous blend requires no mixing
• Clings to cable throughout long pulls
• Easy to apply by hand or with pump.
• Won't dry out -- surface coat forms to control evaporation
• Dries to a thin, non-conductive film that won't clog conduit.
• Stays on cable when pulling through water filled conduits.
• Compatible with a wide range of cable jackets Including Polyethylene Jackets
• Compatible with semi-conducting materials.
• Temperature stable. Does not liquify or get runny at high temperatures.
• Environmentally safe non-toxic, non-flammable and non-corrosive
Installation Techniques
The lubricant needs to reach all points where the cable and conduit rub together, to obtain optimum tension reduction. Normal application is by hand wiping on the cable jackets as the cable is pulled into the conduit. The cable will generally carry enough lubricant to complete an average pull. If cable pulls are long or difficult, inject extra lubricant directly into the conduit ahead of the cable, in addition to wiping on the cable jacket The amount of lubricant needed can vary greatly depending on the difficulty of the pull. A general formula to determine application rates for a normal pullis:
Quantity (gallons) - .0015 xLxD
L-length of pullin feet
D-diameter of conduit in inches (approximately 3/4 gallon per 100 ft. of 5"conduit).
Installation Techniques
The lubricant needs to reach all points where the cable and conduit rub together, to obtain optimum tension reduction. Normal application is by hand wiping on the cable jackets as the cable is pulled into the conduit. The cable will generally carry enough lubricant to complete an average pull. If cable pulls are long or difficult, inject extra lubricant directly into the conduit ahead of the cable, in addition to wiping on the cable jacket The amount of lubricant needed can vary greatly depending on the difficulty of the pull. A general formula to determine application rates for a normal pullis:
Quantity (gallons) - .0015 xLxD
L-length of pullin feet
D-diameter of conduit in inches (approximately 3/4 gallon per 100 ft. of 5"conduit).
Quantity (gallons) - .0015 xLxD
L-length of pullin feet
D-diameter of conduit in inches (approximately 3/4 gallon per 100 ft. of 5"conduit).
PC-WAX 拉線膏
Cable Pulling Lubricant
Superior Lubricity!!! Applied Easily!!!
C-WAX Cable Pulling Lubricant is a yellow wax based emulsion which has excellent lubricating properties for smooth low tension wire and cable pulling Which is suitable for pulling a wide variety of cables types. These including power, control, instrumentation and communication cables.
* Wax-based formula provides superior lubricity,
* Creamy texture applies easily and uniformly
* Homogeneous blend requires no mixing.
* Clings to cable throughout long pulls.
* Easy to apply by hand or with pump.
* Won't dry out--surface coat forms to control evaporation.
* Dries to a thin, non-conductive film that won't clog conduit.
* Stays on cable when pulling through water filled conduits.
* Compatible with a wide range of cable jackets Including Polythylene Jackets.
* Compatible with semi-conducting materials.
* Environmentally safe --non-toxic, non-flammable and non-corrosive.
C-WAX Cable Pulling Lubricant is a yellow wax based emulsion which has excellent lubricating properties for smooth low tension wire and cable pulling Which is suitable for pulling a wide variety of cables types. These including power, control, instrumentation and communication cables.
* Wax-based formula provides superior lubricity,
* Creamy texture applies easily and uniformly
* Homogeneous blend requires no mixing.
* Clings to cable throughout long pulls.
* Easy to apply by hand or with pump.
* Won't dry out--surface coat forms to control evaporation.
* Dries to a thin, non-conductive film that won't clog conduit.
* Stays on cable when pulling through water filled conduits.
* Compatible with a wide range of cable jackets Including Polythylene Jackets.
* Compatible with semi-conducting materials.
* Environmentally safe --non-toxic, non-flammable and non-corrosive.