SB736
E.P. SOLUBLE OIL
SB736 is a high performance water soluble metalworking fluid enhancing lubricity for a wide variety of machining operations. It forms milky emulsions, with low foam and high cooling and anti-corrosive properties. SB736 is highly recommended for use as a coolant in difficult metalworking applications.
SB736 provides superior high lubricity where the extreme pressure condition required, such as stainless steel and alloy steel processing.
Characteristics:
● Wide concentration range makes SB736 ideal for a variety of applications.
● Displays great bio-stable, low foaming, and non-staining properties.
● Stronger cutting capability and lubricity increase the precision, efficiency and prolong the lifespan of cutting tools.
● Does not have any negative effects on workers and will protect the machine from rust.
● Environmentally friendly
Dilution Ratio :
Boring 15~25 times, Punching 10~20 times,
Milling 20~30 times, Broaching 8~10 times,
Drilling 15~25 times, Grinding 40~60 times,
Cutting 20~30 times, Tapping 10~20 times,
Sawing 20~30 times, Drawing 8~10 times,
Turning 20~30 times to normal metal, 10~20 times to stainless steel, 8~15 times to hard metal.
Dilution Method :
Slowly introduce SB736 into the water while stirring vigorously. (Attention: Reverse operation would cause a little effect)
SB736 provides superior high lubricity where the extreme pressure condition required, such as stainless steel and alloy steel processing.
Characteristics:
● Wide concentration range makes SB736 ideal for a variety of applications.
● Displays great bio-stable, low foaming, and non-staining properties.
● Stronger cutting capability and lubricity increase the precision, efficiency and prolong the lifespan of cutting tools.
● Does not have any negative effects on workers and will protect the machine from rust.
● Environmentally friendly
Dilution Ratio :
Boring 15~25 times, Punching 10~20 times,
Milling 20~30 times, Broaching 8~10 times,
Drilling 15~25 times, Grinding 40~60 times,
Cutting 20~30 times, Tapping 10~20 times,
Sawing 20~30 times, Drawing 8~10 times,
Turning 20~30 times to normal metal, 10~20 times to stainless steel, 8~15 times to hard metal.
Dilution Method :
Slowly introduce SB736 into the water while stirring vigorously. (Attention: Reverse operation would cause a little effect)
Specification
Appearance |
Blue Liquid |
Spec. Gravity 60/60℉ |
0.905 |
Flash Point ℃ |
200 |
Viscosity cSt.@40℃ |
35 |
pH (5% in water) |
9.5 |
Emulsion Stability |
Good |