Lubricating Oil for Special Applications

It is good quality, high viscosity index and low pour point lubricating oil designed for filling with bubble level instrument.

Packaging: 5 Gal ; 200 L

BC110 is good quality, high viscosity index and low pour point lubricant. The characteristics such as anti-oxidation, rust preventive and abrasion resistance can provide a better performance to reduce friction coefficient, prolong the using life of bearing. Because of its great chemical stability, the plastic material will not be eroded.

BC111 is good quality, high viscosity index and low pour point lubricant. The characteristics such as anti-oxidation, rust preventive and abrasion resistance can provide a better performance to reduce friction coefficient, prolong the using life of bearing. Because of its great chemical stability, the plastic material will not be eroded.

BC258 is good quality, high viscosity index and low pour point lubricant. The characteristics such as anti-oxidation, rust preventive and abrasion resistance can provide a better performance to reduce friction coefficient, prolong the using life of bearing. Because of its great chemical stability, the plastic material will not be eroded.

This lubricant is made by synthetic lubricating base oil. Used under long-term and high temperature condition, it can still maintain low evaporation rate and excellent lubricating performance. Smokeless and never raise a stink, it can be used for the chains under high temperature working condition or difficult to lubricate condition.

Characteristic:
● Can prevent the abrasion of the chain at a high temperature.
● Can provide long-term lubrication and save energy.
● Can maintain lower level of evaporation than others.
● Has strong penetrating capability which shows better effect on the lubrication of corner.
● No solid residue left under high temperature operation.

Range of application:
It is suitable for using in variety of industries such as dying, painting, powder coating, paper-making and building materials industry. In particular, it can be used to chain of transferring belt in high temperature or friction parts which need to be lubricated, for example, slides, bearings etc.,.

This lubricant is made by synthetic lubricating base oil. Used under long-term and high temperature condition, it can still maintain low evaporation rate, little carbon residual, excellent lubricating and anti-oxidation performance. Smokeless and never raise a stink, it can be used for the chains under high temperature working condition or difficult to lubricate condition.

Characteristic:
● Can prevent the abrasion of the chain at a high temperature.
● Can maintain lower level of evaporation than others.
● Has strong penetrating capability which shows better effect on the lubrication of corner.
● No solid residue left under high temperature operation.

Range of application:
It is suitable for using in variety of industries such as dying, painting, powder coating, paper-making and building materials industry. In particular, it can be used to chain of transferring belt in high temperature or friction parts which need to be lubricated, for example, slides, bearings etc.,.

Synthetic High Temperature Chain Lube is a synthetic base fluid combined with an excellent additive package, resulting in excellent thermal and oxidative stability along with a high film strength that reduces friction and wear.
It does not contain mineral oil and therefore will not form hard carbon deposits which often cause seizure in links and bearings. It has excellent load carrying properties that ensure maximum anti-wear protection is provided for a range of equipment.

Features:
● Provides long life at high temperatures up to 270°C
● Excellent anti-wear & anti-squeaking properties
● Less carbon residue & low evaporation.
● High load carrying capacity
● Long-term lubrication and energy saving.


Applications:
Suitable for applying in variety of industries such as dying, painting, powder coating, alloy wheel producing, paper-making and building materials industry. In particular, it can be used to chain of transferring belt in high temperature or friction parts which need to be lubricated, for example, slides, bearings etc.,.

This lubricant is made by synthetic lubricating base oil. Used under prolong high temperature condition, it can still maintain low evaporation rate and excellent lubricating performance. Smokeless and never raise a stink, it can be used for the chains under high temperature working condition or difficult to lubricate condition.

Characteristic:
⊙ Can prevent the abrasion of the chain at a high temperature.
⊙ Can provide long-term lubrication and save energy.
⊙ Can maintain lower level of evaporation than others.
⊙ Has strong penetrating capability which shows better effect on the lubrication of corner.
⊙ No solid residue left under high temperature operation.

Range of application:
It is suitable for using in variety of industries such as dying, painting, powder coating, paper-making and building materials industry. In particular, it can be used to chain of transferring belt in high temperature or friction parts which need to be lubricated, for example, slides, bearings etc.,. .

This lubricant is made by synthetic lubricating base oil. Used under long-term and high temperature condition, it can still maintain low evaporation rate and excellent lubricating performance. Smokeless and never raise a stink, it can be used for the chains under high temperature working condition or difficult to lubricate condition.

Characteristic:
● Can prevent the abrasion of the chain at a high temperature.
● Can provide long-term lubrication and save energy.
● Can maintain lower level of evaporation than others.
● Has strong penetrating capability which shows better effect on the lubrication of corner.
● No solid residue left under high temperature operation.
● Low lipid solubility and will not erode the plastic component.

Range of application:
It is suitable for using in variety of industries such as dying, painting, powder coating, alloy wheel producing, paper-making and building materials industry. In particular, it can be used to chain of transferring belt in high temperature or friction parts which need to be lubricated, for example, slides, bearings etc.,.

Stenter Chain Oil CH522 is formulated by synthetic lubricating base oil. Particularly suitable for high temperature chain lubricant, such as in textile and stenter lubrication of chain drives, which is exposed to high temperatures up to 200 ºC.

Characteristic:
⊙ Can prevent the abrasion of the chain at a high temperature.
⊙ Can provide long-term lubrication and save energy.
⊙ Can maintain lower level of evaporation than others.
⊙ Has strong penetrating capability which shows better effect on the lubrication of corner.
⊙ No solid residue left under high temperature operation.

ET series are high quality, nontoxic and long life heat transfer fluid. It contains the long-term performance additive and can be used under 250℃ condition. Following are characteristics of ET series. Low vapor tension, high thermal stability, high specific heat capacity and high thermal conductivity.

It can be widely applied to a variety of industries such as:
1. Textile industry: Resin setting machine, Tender, Drying room, High temperature machine and Rolling machine
2. Plastic industry: Plastic foaming, Viscose drying, Drying room
3. Wood processing: Celotex, Three-plywood, Polyflor board.
4. Chemical industry: Grease, Polymer, Drying, Reactive tank, Polymer tower, Blender, Resin and Coating industry.
5. Electric industry: Oil-filled electric heater, Electric furnace
6. Paper-making industry: Plywood paper, Drying cylinder
7. Food industry: Central kitchen, Canning industry, Oven and Vegetable oil refining
8. Other industries or applying occasions: Hospital, Lab equipments, Heated swimming pool, Ships, Rubber, Petroleum
　 and Paint industry.


Note: ET900 is high temperature synthetic heat transfer fluid. It is specific applied to the occasion over 250 ℃. Under normal conditions, ET300 or ET500 is available.

ET600 series are high quality, nontoxic and long life heat transfer fluid. It contains the long-term performance additive and can be used under 250℃ condition. Following are characteristics of ET series. Low vapor tension, high thermal stability, high specific heat capacity and high thermal conductivity.

It can be widely applied to a variety of industries such as:
1. Textile industry: Resin setting machine, Tender, Drying room, High temperature machine and Rolling machine
2. Plastic industry: Plastic foaming, Viscose drying, Drying room
3. Wood processing: Celotex, Three-plywood, Polyflor board.
4. Chemical industry: Grease, Polymer, Drying, Reactive tank, Polymer tower, Blender, Resin and Coating industry.
5. Electric industry: Oil-filled electric heater, Electric furnace
6. Paper-making industry: Plywood paper, Drying cylinder
7. Food industry: Central kitchen, Canning industry, Oven and Vegetable oil refining
8. Other industries or applying occasions: Hospital, Lab equipments, Heated swimming pool, Ships, Rubber, Petroleum
　 and Paint industry.

ET 990 is high quality, nontoxic and long-term usage of synthetic heat transfer fluid. It contains the long-life performance additive and can be used over 300℃ condition. Following are characteristics of ET 990. Low vapor tension, high thermal stability, high specific heat capacity and high thermal conductivity.

HS-12 can be applied to oil hydraulic system. It is low pour point hydraulic oil and easy to separate with water. HS-12 contains strong anti-oxidation, anti-foaming, abrasion resistance and rust preventive additives. Great performance of low temperature resistance, HS-12 is suitable for door close hydraulic oil system filling in arctic and frigid zone.

HS-26 can be applied to oil hydraulic system. It is long-term usage, low flow point hydraulic oil and easy to separate with water. HS-26 contains strong anti-oxidation, anti-foaming, abrasion resistance and rust preventive additives. Great performance of low temperature resistance, HS-26 is suitable for door close hydraulic oil system filling in arctic and frigid zone.

HS-27 can be applied to oil hydraulic system. It is long-term usage, low flow point hydraulic oil and easy to separate with water. HS-27 contains strong anti-oxidation, anti-foaming, abrasion resistance and rust preventive additives. Great performance of low temperature resistance, HS-27 is suitable for door close hydraulic oil system filling in arctic and frigid zone.

HS-28 can be applied to oil hydraulic system. It is long-term usage, low flow point hydraulic oil and easy to separate with water. HS-28 contains strong anti-oxidation, anti-foaming, abrasion resistance and rust preventive additives. Great performance of low temperature resistance, HS-28 is suitable for door close hydraulic oil system filling in arctic and frigid zone.

HS-32 can be applied to oil hydraulic system. It is long-term usage, low flow point hydraulic oil and easy to separate with water. HS-32 contains strong anti-oxidation, anti-foaming, abrasion resistance and rust preventive additives. Great performance of low temperature resistance, HS-32 is suitable for door close hydraulic oil system filling in arctic and frigid zone.

HS-47 can be applied to oil hydraulic system. It is long-term usage, low flow point hydraulic oil and easy to separate with water. HS-47 contains strong anti-oxidation, anti-foaming, abrasion resistance and rust preventive additives. Great performance of low temperature resistance, HS-47 is suitable for door close hydraulic oil system filling in arctic and frigid zone.

HS931 is water based synthetic hydraulic fluid and specifically designed for the hydraulic system. It shows great performance such as high viscosity index, low pour point, anti-oxidation, abrasion resistance, anti-foaming, rust preventive and low temperature resistance. HS931 is suitable for the hydraulic system of fireproof requirement or hydraulic system of sport equipment refilling at frigid temperature or arctic zone.

P060 & P100 are Naphthenic type of Rubber Processing Oils. They can be applied as general purpose oil in manufacture of automotive tubes, light colored non-back footwear, moulded and extruded rubber products.

Characteristics
• These are non-staining in nature and display great thermal, oxidation and color stability.
• They are compatible for processing with NR, SBR, PBR, EPDM, TPR/TPE rubbers.

Packaging
✔ 18L (Pail)
✔ 200L (Drum)

SH005 are lubricating oils for circulation and bearing lubrication, superbly suited for applications in mobile and stationary hydraulic systems where the use of a detergent / dispersant hydraulic oil with low friction coefficients, good stick-slip behaviour and excellent corrosion protection properties is required.
SH005 is also suited for use as high-speed spindle oil, break-in oil, and corrosion protection oil.
⊙ Excellent corrosion protection
⊙ Low foaming tendency
⊙ Good air release properties
⊙ High ageing resistance
⊙ Good viscosity-temperature behaviour
⊙ Protects against wear
⊙ Excellent contaminant-removing and transportation properties (detergent / dispersant properties)
⊙ Low friction coefficient
⊙ Reduces stick-slip effects

SI100 is high viscosity index and low pour point silicone oil. It also contains anti-oxidation, abrasion resistance and anti-foaming additives. SI 100 is suitable for lubrication to high/low temperature condition, mechanical hydraulic system, mold release lubricating, precision instruments lubricating, plastic and rubber products lubricating and insulating.

The Synthetic Long Term Oil SL268 is formulated with high quality ester oil. With its high flash point and low pour point, it displays a great viscosity-temperature performance. Within the application, SL268 shows a good ageing and oxidation stability and corrosion protection, even to variety of precise equipment.
The Synthetic Long Term Oil SL268 is designed specifically for long time working and high demand conditions. It can be applied to wide field such as plain bearings, sintered bearings, rolling bearings subject to high thermal and high speed, turbines, radio-probes, precision and measuring instruments, control systems, communication equipment, synchronous motors and elements with exacting tolerance in the fields of telecommunication.

Characteristics
● Long time working for high demand conditions.
● Good viscosity-temperature performance.
● Wide service temperature range.
● Ideal for impregnation lubrication of sintered bearings.
● Oxidation and aging stability. Good corrosion protection.

SV101 is high quality and high viscosity index hydraulic oil. It shows great performance such as low pour point, anti-oxidation, abrasion resistance, anti-foaming, rust preventive and high/ low temperature resistance. SV101 is suitable for the high damping shock absorber, vehicle hydraulic component and hydraulic system for door closer refilling at frigid or arctic zone.

SV281 is high quality and high viscosity index hydraulic oil. It shows great performance such as low pour point, anti-oxidation, abrasion resistance, anti-foaming, rust preventive and high/ low temperature resistance. SV281 is suitable for the high damping shock absorber, vehicle hydraulic component and hydraulic system for door closer refilling at frigid or arctic zone.

SV122 is high quality and high viscosity index hydraulic oil. It shows great performance such as low pour point, anti-oxidation, abrasion resistance, anti-foaming, rust preventive and high/ low temperature resistance. SV122 is suitable for the high damping shock absorber, vehicle hydraulic component and hydraulic system for door closer refilling at frigid or arctic zone.

SV251 is high quality and high viscosity index hydraulic oil. It shows great performance such as low pour point, anti-oxidation, abrasion resistance, anti-foaming, rust preventive and high/ low temperature resistance. SV251 is suitable for the high damping shock absorber, vehicle hydraulic component and hydraulic system for door closer refilling at frigid or arctic zone.

SV352 is high quality and high viscosity index hydraulic oil. It shows great performance such as long-term endurance of shearing (damping performance remains well), low pour point, anti-oxidation, abrasion resistance, anti-foaming, rust preventive and high/ low temperature resistance. SV352 is suitable for the modified car, high damping shock absorber, vehicle hydraulic component and hydraulic system for door closer refilling at frigid or arctic zone.

SV358 is high quality and high viscosity index hydraulic oil. It shows great performance such as long-term endurance of shearing (damping performance remains well), low pour point, anti-oxidation, abrasion resistance, anti-foaming, rust preventive and high/ low temperature resistance. SV358 is suitable for the modified car, high damping shock absorber, vehicle hydraulic component and hydraulic system for door closer refilling at frigid or arctic zone.

SVH68 is a high performance, environmentally friendly hydraulic lubricating oil, which is formulated with selected synthetic esters. It is more easily biodegraded, less hazardous and more suitable for use in environmentally sensitive areas.

SVH68 is perfectly suited for hydraulic systems requiring hydraulic fluids with extremely low temperature / wide range temperature performance and enhanced anti-wear, anti-rust, anti-oxidation, anti-foam and demulsibility properties, such as agricultural, forestry, heavy construction equipment, marine and military used.