Toggle menu

Long Lub-Tek Corporation

Water Soluble Metal forming, drawing working fluids

Long Lub-Tek Corporation is committed to developing Water Soluble Metal forming, drawing working fluids that ultimately create innovative products that exceed customer expectations. We are the global leader in chemical products. We develop, manufacture and distribute groundbreaking Metal Forming, Forging, Drawing working fluids that shatter the status quo and help customers gain and maintain a competitive edge. We believe that our Water Soluble Metal forming, drawing working fluids have very great potential for this type of development in chemical products industry. Long Lub-Tek Corporation is committed to developing Water Soluble Metal forming, drawing working fluids that ultimately create innovative products that exceed customer expectations.

SD440

SYNTHETIC DRAWING FLUID

SD440 has great performance on extreme pressure and lubricity. It is widely applied to steel plate and nonferrous metal plate processing such as press, drawing and forming. User can dilute it with 2~50 times of water according to the different requirement of load conditions. It shows excellent cooling and lubricating effect which can prevent the work piece galling, scratching and fragments. In addition, it can increase product’s precision and reduce defective rate.

Characteristics:
 1. SD440 can be diluted with 2~50 times of water according to the different requirement of load conditions.
   Light load condition: 30~50 times
   Moderate load condition: 10~20 times
   Heavy load condition: 2~8 times
   Compare with other general metal working fluid, SD440 can help user reduce the cost and consumption of oil.
 2. Great lubricity and heat dissipation can avoid mould and tools over heating and extend their lifespan.
 3. Not like the conventional method of coating on metal surface, SD440 can speed-up the procession and decrease
   amount of man-hour.
 4. It can be cleaned easily. Hence, the following operation such as degrease and electroplating can work well in order
   to raise the efficiency of production.
 5. Outstanding rust resistance can avoid using rust preventive oil and cut down the expenditure.

SD452

SYNTHETIC DRAWING FLUID

SD452 has great performance on extreme pressure and lubricity. It is widely applied to steel wire, steel plate and nonferrous metal plate processing such as press, drawing and forming. User can dilute it with 2~50 times of water according to the different requirement of load conditions. It shows excellent cooling and lubricating effect which can prevent the work piece galling, scratching and fragments. In addition, it can increase product’s precision and reduce defective rate.

Characteristics:
 1. SD452 can be diluted with 2~50 times of water according to the different requirement of load conditions.
    Light load condition: 30~50 times
    Moderate load condition: 10~20 times
    Heavy load condition: 2~8 times
   Compare with other general metal working fluid, SD452 can help user reduce the cost and consumption of oil.
 2. Great lubricity and heat dissipation can avoid mould and tools overheating and extend their lifespan.
 3. Not like the conventional method of coating on metal surface, SD452 can speed-up the procession and decrease
  amount of man-hour.
 4. It can be cleaned easily. Hence, the following operation such as degrease and electroplating can work well in order
   to raise the efficiency of production.
 5. Outstanding rust resistance can avoid using rust preventive oil and cut down the expenditure.

SD665

Synthetic Drawing Fluid

SD665 is a synthetic metal forming fluid for stamping and drawing of ferrous and most non-ferrous metal. It is a concentrated liquid and is intended to be diluted with water for maximum efficiency and economy. SD665 provides excellent lubricity performance to prevent galling, tearing, scoring and lacquer peel off.

Advantages
✔ Diluted with water for different loading. Ideal product for reducing manufacturing costs.
✔ Great lubricity prevent the fracture and scratch on surface of work piece, prolong the machines and tools life, increase product’s precision, rise production efficiency and reduce defective rate.
✔ Easy to clean off with water for the further processes such as coating or electroplating.

Applications
The proper concentration of SD665 will vary dependent upon the type of metal, gauge of metal, process involved and method of lubricant application. SD665 is to be mixed with water for using.


 Drawing & Stamping

 Recommended Dilutions

 Light

 3% ~ 5% ; (1:32) to (1:19)

 Medium

 10% ~ 20% ; (1:9) to (1:4)

 Heavy Duty

 25% ~ 50% ; (1:3) to (1:1)


SD966

Synthetic Drawing Fluid

SD966 is a synthetic metal forming fluid for stamping and drawing of ferrous and most non-ferrous metal. It is a concentrated liquid and is intended to be diluted with water for maximum efficiency and economy. SD966 provides excellent lubricity performance to prevent galling, tearing, scoring and lacquer peel off.

Advantages
✔ Diluted with water for different loading. Ideal product for reducing manufacturing costs.
✔ Great lubricity prevent the fracture and scratch on surface of work piece, prolong the machines and tools life, increase product’s precision, rise production efficiency and reduce defective rate.
✔ Easy to clean off with water for the further processes such as coating or electroplating.

Applications
The proper concentration of SD966 will vary dependent upon the type of metal, gauge of metal, process involved and method of lubricant application. SD966 is to be mixed with water for using.


Drawing & Stamping

Recommended Dilutions

Light

3% ~ 5% ; (1:32) to (1:19)

Medium

10% ~ 20% ; (1:9) to (1:4)

Heavy Duty

25% ~ 50% ; (1:3) to (1:1)

SD971

SYNTHETIC DRAWING FLUID

SD971 has great performance on extreme pressure and lubricity. It is widely applied to steel plate and nonferrous metal plate processing such as press, drawing and forming. User can dilute it with 2~50 times of water according to the different requirement of load conditions. It shows excellent cooling and lubricating effect which can prevent the work piece galling, scratching and fragments. In addition, it can increase product’s precision and reduce defective rate.

Characteristics:
 1. SD971 can be diluted with 2~50 times of water according to the different requirement of load conditions.
   Light load condition: 30~50 times
   Moderate load condition: 8~20 times
   Heavy load condition: 2~5 times
   Compare with other general metal working fluid, SD971 can help user reduce the cost and consumption of oil.
 2. Great lubricity and heat dissipation can avoid mould and tools over heating and extend their lifespan.
 3. Not like the conventional method of coating on metal surface, SD971 can speed-up the procession and decrease
   amount of man-hour.
 4. It can be cleaned easily. Hence, the following operation such as degrease and electroplating can work well in order
   to raise the efficiency of production.
 5. Outstanding rust resistance can avoid using rust preventive oil and cut down the expenditure.
Long Lub-Tek Corporation, the world’s leading manufacturer of Water Soluble Metal forming, drawing working fluids, is positioned at the leading edge of innovation and service, providing the most comprehensive Water Soluble Metal forming, drawing working fluids solutions packages to its customers via a portfolio of highly recognized brands. We are a global manufacturer of high quality Water Soluble Metal forming, drawing working fluids and our company's internal strategy to continually improve quality and delivery meant the Water Soluble Metal forming, drawing working fluids was a product fit for the customers. If you are looking for Water Soluble Metal forming, drawing working fluids manufacturing company, let us be your answer.
Related Product Categories